•  
  • FF310 Fault Finder Electrical Open and Short Fault Finder \ Fault Tracer

    Easy to use tool designed for tracking and tracing short and open circuit in 6 to 42 volt electrical circuits.

    Makes finding circuit faults easy allowing the repairer to trace the circuit to the fault, operates on circuits ranging from 6 to 42 volts with adjustable sensitivity for all situations.

    General Technologies Corp

    FF310 Fault Finder Electrical Open and Short Fault Finder \ Fault Tracer
    FF310 Fault Finder Electrical Open and Short Fault Finder \ Fault TracerFF310 Fault Finder Electrical Open and Short Fault Finder \ Fault TracerFF310 Fault Finder Electrical Open and Short Fault Finder \ Fault TracerFF310 Fault Finder Electrical Open and Short Fault Finder \ Fault TracerFF310 Fault Finder Electrical Open and Short Fault Finder \ Fault Tracer
    FF310 Fault Finder Electrical Open and Short Fault Finder \ Fault TracerFF310 Fault Finder Electrical Open and Short Fault Finder \ Fault TracerFF310 Fault Finder Electrical Open and Short Fault Finder \ Fault TracerFF310 Fault Finder Electrical Open and Short Fault Finder \ Fault TracerFF310 Fault Finder Electrical Open and Short Fault Finder \ Fault Tracer

    FF310 Open and Short Circuit Tracer / Fault Finder

    Customers rating: Add to Favorites

    $321.44
    We calulate the lowest shipping price possible on checkout.

    The FF310 - FaultFinder™ is a specially designed tool for tracking and tracing short and open circuits, broken wires and current leaks on any electrical circuit with voltages from 6 to 42 Volt DC, and is used by technicians worldwide in an ample range of equipment such as automobiles, truck trailers, tractors, farming equipment, boats, forklifts, motorcycles, all-terrain and recreational vehicles, etc. The 42V ready™ FF310's wide working voltage range, automatic short/open detection, adjustable sensitivity levels and flexible antenna probe enables the technician to troubleshoot a complete array of common electrical problems without having to untie wire harnesses or remove body panels.

    • 42 V Ready: for use in the new generation of vehicles with mixed or single 42 Volt systems
    • Operates on DC voltages from 6 to 42 volts
    • Internally protected against power surges and overloads
    • 8" flexible probe allows reaching wires in congested places
    • Transmitter and Receiver LEDs show open or short circuit conditions
    • Variable audio/visual signal provides fast and intuitive feedback on the circuit/wire proximity
    • Adjustable sensitivity for all tracing situations
    • No wire piercing required, non-contact technology!
    • Tracing of wires is made possible even inside bundles, conduits, behind panels, under carpets, upholstery, etc
    • Transmitter has auto polarity and leads with 5 amps alligator clips


    Simple and easy to use

    It only requires connecting the transmitter in series with the circuit or wire under test, (i.e.: in place of a blown fuse, across a connector, in series with an open wire, a light bulb socket, etc.), and scanning the circuit/wire with the tracer's flexible probe to find the trouble spot

    This professional tool will work on all kinds of circuits with voltages between 6 and 42 Volt DC, such as those found in automobiles, trucks, trailers, tractors, boats, RVs, etc… With its wide working voltage range, automatic open/short detection, flexible probe and adjustable sensitivity, the FF310 Faultfinder enables you, to troubleshoot a complete array of common problems, in a wide variety of vehicles

    Now with the FF310 you can locate short circuits, broken wires, current leaks and perform wire tracing quickly and easily spending only a fraction of the time and effort required when using conventional methods. In most cases, you will even be able to locate the problem area without having to untie harnesses, open conduits or remove panels

    Applications

    • Short circuit tracing
    • Open circuit tracing
    • Wire identification
    • Wire/Circuit tracing
    • Ground connections checks

    For use in

    • Automobiles
    • Trucks
    • Trailers
    • Boats
    • RVs
    • Any 6 to 42 Volt DC powered circuits

    Transmitter

    • Indicators: Green LED for power On and Open circuits. Red LED for short circuits
    • Power source: 9-volt alkaline battery. Duracell type MN1604 (included)
    • Battery life: approx. 25 hrs
    • Connector: Two 5 A alligator clamps with auto polarity and 18" long cable
    • Physical dimensions: 152.5 x 44.5 x 23 mm - Excluding probes
    • Weight: Approximately 145 g Including battery

    Receiver

    • Sensitivity: Three user selectable sensitivity levels (low, medium and high)
    • Receiver probe: Flexible 8" goose-neck insulated steel probe
    • Indicators: Green LED indicator for power on and open circuits. Red LED indicator for short circuits
    • Variable flashing and modulated audible signal
    • Power source: Standard 9-volt alkaline battery. Duracell type MN1604 (included)
    • Battery Life: approx. 25 hrs. Auto Power Off
    • Physical dimensions: 155 x 44.5 x 23 mm - Excluding probe
    • Weight: Approximately 145 g Including battery

    Fox & Hound Operation Giude

    The perfect tool for locating short circuits, open circuits, and wire tracing on 6 - 42 volt systems.

    GTC Fox and hound operation

    The GTC FF310's transmitter injects pulses of current and a radio frequency for detection by the receiver. Made in Canada by General Technologies Corp, this tool is the winner of a PTEN innovation award.


    Open Circuits
    GTC Fox and Hound Wire Tracer, Finding Open Circutis

    When installed in a circuit the transmitter emits a radio frequency, as the signal is only able to travel as far as the wire has continuity, the receiver will stop receiving the transmitters signal where there is an open circuit.


    Tracing wires

    Using the 3 sensitivity settings, the FF310 is also useful in locating wires, be it from one end of a coach to the other, or, finding a particular wire from the ECU in an engine bay.


    Short Circuits
    Fault Finder GTC FF310, Finding Short Circuits

    When installed in a circuit, if the transmitter finds continuity to earth, it automatically illuminates the "short circuit" light and sends current pulses. The emitted current pulses are detected at the short location, Using the adjustable sensitivity on the receiver can help narrow down the area (high), harness (medium), and wire (low). as the receiver gets closer to the short, the receiver's beeping increases frequency.

    Kit Includes

    • FF310T ( transmitter)
    • FF310R (receiver)
    • CT6100 Fuse block adapters (three sizes: Mini, ATO and Maxi)
    • CT8002 Computer safe cordless circuit tester
    • Hard padded case for carrying and storage
    • User's Manual

    Technical Specifications

    Input Voltage range: 6 to 42 Volt DC
    Input DC Current: Unlimited (internally limited)
    Voltage output: 5 Volt DC maximum
    Current Output: 100 mA DC rms maximum
    Warranty: 1 Year
    ___

    Dimesnions

    Receiver:  
    Hight: 360 mm (inc Probe)
    Width: 45 mm
    Depth: 22 mm
    Weight: 125 Grams
       
    Transmitter:  
    Hight: 150 mm
    Width: 45 mm
    Depth: 22 mm
    Weight: 127 Grams
    ___

    Images Gallery


    Downloads

    Product Flyer

    Product Flyer -Printer Friendly

    Magazine Advertising

    Operation Manual


    Video

    GTC FF310 Overview

    By: GTC


    Comment


    No Very





    Captcha Image